The team at Crossbridge Compliance was assembled with quality in mind. Quality as defined by knowledge, accuracy, service, value and efficiency. The leaders have several hundred years of experience combined and have contributed significantly to the NDT industry through the development of personnel, establishing techniques, Code committee involvement and client relationships. CCTS has ASNT NDT Level III personnel certified in seven (7) methods to provide consulting, training or auditing. We look forward to using our extensive experience to serve our clients and meet their nondestructive testing requirements.
Radiography is a mainstay of the NDT industry. Advancements in capture methods, e.g. film vs digital, provide many options to meet our clients needs. Weld quality, casting quality, component integrity, corrosion investigation, or informational images are all offered following established, compliant procedures prepared by qualified Level III personnel.
- Conventional film radiography using gamma or X-ray radiation as a source
- Computed radiography using phosphor screens
- Digital radiography using Digital Detector Arrays
At our facility or, at your location, we can help. Call us today to discuss your specific radiography needs.
Magnetic Particle Testing
Magnetic Particle Testing (MT), also referred to as Magnetic Particle Inspection (MPI) is a very reliable method for detecting surface and near-surface discontinuities in ferromagnetic materials such as carbon steel. AC Yoke, HWDC bench, dry visible, wet fluorescent, black-on-white, CCTS provides mobile and in-house examinations to meet the requirements of ASME, API, AWS, as well as other Codes and standards.
Call today to discuss your Magnetic Particle Testing needs!
Liquid Penetrant Testing
Liquid Penetrant Testing (PT) also referred to as Liquid Penetrant Inspection (LPI) is a popular method for surface examination of materials, especially non-ferromagnetic materials such as aluminum or stainless steel. Solvent or water removable, visible dye or fluorescent, CCTS can provide PT services to meet any need.
Call today to discuss your Liquid Penetrant Testing needs!
Ultrasonic Testing (UT) technology has grown exponentially over the past several years with several techniques being separated out into stand-alone methods. Conventional UT such as UT thickness, straight beam flaw detection and angle-beam examination are the mainstays of the UT examination playbook while advanced techniques such as Phased Arrays and TOFD grow ever more popular. Corrosion investigation, material quality, weld examination are all commonly performed with one or more of the listed techniques.
Call Crossbridge today to discuss your Ultrasonic Testing needs!
Guided Wave UT
Guided Wave UT (GWUT) or Long Range UT has quickly become the go-to method for examination of insulated or buried piping and inaccessible pipeline sections such as cased crossings. Under ideal conditions, very long sections of pipe can be investigated from a single location. Simply avoiding the necessity of removing insulation or digging up large sections of pipe makes GWUT a very desirable and affordable alternative.
Call Crossbridge today to schedule your piping inspections!
Leak Testing consists of several different sub-methods and techniques designed for specific applications. Pressure Change testing and Bubble Leak testing are two of the most commonly used. Crossbridge has personnel certified to ASNT Level III in Leak Testing to help you select the best method and technique for your application, develop procedures, provide training and qualify procedures. Our Level II personnel can provide Bubble Leak or Pressure Change testing of valves, vessels, piping or components.
Call Crossbridge today to discuss your Leak Testing needs!
Visual testing is the oldest and one of the most broadly applied inspection methods today. Direct visual examination of welds, components or equipment is commonly utilized to verify weld surface quality, ensure procedure compliance, perform dimensional verification, or inspect for corrosion/damage. Advanced techniques such as remote viewing devices can be used to examine areas not accessible for normal visual examination. We also have AWS- Certified (CWI) and Senior Certified Welding Inspectors (SCWI) for welding inspection and welding program services.
Contact Crossbridge today for your Visual Inspection needs!
There are several "testing" methods that while associated with the quality effort, and often performed by NDT personnel, they are not yet addressed as NDT methods. Hardness testing, Positive Material Identification (PMI), Ferrite Content testing and other specialized material tests are available.