Training

Crossbridge and our subsidiary, C&R Compliance, offer a full complement of Safety training. to meet your compliance needs. Select the type of training you are interested in from the list below or call us today! 

First Aid/CPR
OPEN

1910.151(a)
The employer shall ensure the ready availability of medical personnel for advice and consultation on matter of plant health.

1910.151(b)
In the absence of an infirmary, clinic, or hospital in near proximity to the workplace which is used for the treatment of all injured employees, a person or persons shall be adequately trained to render first aid. Adequate first aid supplies shall be readily available. 

Crossbridge Compliance offers MEDIC First Aid BasicPlus which is a combined adult CPR, AED, and first aid training program designed specifically for the occupational first aid provider. This extremely flexible program will help employers meet OSHA and other federal and state regulatory requirements for training employees on how to respond and care for medical emergencies at work. Call today!

Fire Extinguisher
OPEN

1910.157(g) (1)
Where the employer has provided fire extinguishers for employee use in the workplace, the employer shall also provide an educational program to familiarize employees with the general principles of fire extinguisher use and the hazards involved with incipient stage firefighting.

Crossbridge Compliance offers Fire Extinguisher training using the Bullex BullsEye simulation system. The BullsEye is a state of the art training tool that uses digital flame generation and patented sensor technology to demonstrate proper fire extinguishment techniques. This effective training tool will help employers meet OSHA and other federal and state regulatory requirements for training employees how to respond properly to a fire at the workplace. Call today!

Fall Protection
OPEN

1926.503(a) (1)
The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards.

1926.503(a) (2)
The employer shall assure that each employee has been trained, as necessary, by a competent person.

Falls are among the most common causes of serious work related injuries and deaths. Employers must set up the work place to prevent employees from falling off of overhead platforms, elevated work stations or into holes in the floor and walls.

Crossbridge Compliance can assist in training your employees how to properly use fall protection and prevent falls, as well as help ensure your workplace is designed in the safest way to boost productions and eliminate hazards. Call today!

H2S Awareness
OPEN

Hydrogen Sulfide (H2S) Awareness Training is for individuals who require H2S Training as a pre-requisite to employment and for businesses that requres a simple and accessible solution for training their employees. H2S Training is required in many industries including oil & gas, water treatment and seismic.

After completion of this course you should be able to understand:

-Working safely with H2S (What to do and not to do)
-How H2S forms and some important properties such as: flammability, toxicity, odor thresholds and vapor density.
-Protection against H2S using equipment such as respirators, rescue packs and gas monitors.
-Precautions to take to ensure your safety when entering an area which may contain H2S vapors.

PEC - H2S Clear

PEC H2S Clear was designed to improve employee safety for general industry workers who may potentially come in contact with hydrogen sulfide in the workplace. This program meets the revised standards set forth in the ANSI/ASSE Z390.1-2017 and incorporates all of the benefits of a PEC Safety standardized training program. PEC H2S Clear will provide students with crucial knowledge of the dangers pf H2S and the precautions tools and controls necessary when working in potential H2S environments. 

H2S Clear Covers:

-ACGIH's New TLV
-ANSI/ASSE Z390.1-2017
-API RP 49
API RP 55
-MMS 250.490
-The Railroad Commission of Texas

Upon completion of the course, all students are issued a physical and digital PEC ID card with their name, company name, picture, barcode, and completed course. All students are automatically entered into PEC's Advanced Training Tracker where your company's clients and auditors can view proof of employee orientation. 

Equipment/Heavy Equipment Training
OPEN

Equipment Training 

Crossbridge Compliance trainers provide equipment training that is effective and OSHA-compliant. Accidents are a constant - and very real - threat. Safe operation is critical for any business with employees who operate equipment such as:

-Forklifts
-Boom Lifts
-Scissor Lifts

-SkyTrak
-ATV/Utility Vehicles
-Others

Who Would Benefit:

-Individuals requiring equipment operator certification
-Equipment operators
-Warehouse/shipping/receiving managers
-Construction site managers 
-Safety managers
-Safety committee members
-Operations managers

NCCER Heavy Equipment Training

NCCER equipment training details the identification and describes the uses of machines. Each module will identify the components and controls on the typical equipment. Explain safety rules for operating the equipment to avoid damage to persons or properties. Followed up by the proper way to perform prestart inspection and maintenance procedures.  

NCCER Mobile Crane Operator Certification
OPEN

29 CFR 1926.1427 Operator qualification and certification.

The employer must ensure that, prior to operating any equipment the person is qualified or certified to operate the equipment.

NCCER's Mobile Crane Operator Certification Program consists of assessments and practical examinations that meet or exceed current ASME B30.5 consensus safety standards and OSHA 29 CFR part 1926 subpart CC.

Written Assessments:

-Boom Truck Crane
-Industrial / All Purpose Crane
-Lattice Boom Crane
-Telescopic Boom Crane

Practical Examinations:

-Crawler Mount 
-Industrial / All Purpose
-Rough Terrain / All Terrain
-Rubber Tire Truck Mount 

NCCER's Mobile Crane Certification Program Offers:

-ANSI Accreditation
-Associated Builders & Contractors Recognition 
-13 equipment specific certifications, including capacity
-Certification valid for five years from certification date
-AGC of America Recognition 
-OSHA Recognition 

Hazmat / Hazcom / HazWoper
OPEN

These training courses are designed to make sure your employees are properly trained and compliant with EPA, OSHA, and DOT in regards to hazardous waste operations. DOT requires all employees who handle or transport hazardous materials to receive general awareness, function-specific, and safety training.

The following are some of OSHA's major training statutes related to hazardous materials:

-1910.38, Emergency action plans. OSHA Standard. The training requirements of 1910.38(e) cover the designation and training of employees to assist in a safe and orderly evacuation of other employees.
-1910.120, Hazardous waste operations and emergency response. OSHA Standard. The training requirements of 1910.120(e) covers the requirements for different worker populations, and determining if a release is covered by the standard.
-1910.145, Specifications for accident prevention signs and tags. OSHA Standard. Includes specific training requirements for the identification of signs and tags, hazard determination. and precautions to take for personal protection as indicated by signs.
-1910.165, Employee alarm systems. OSHA Standard. The training requirements of 1910.165(b)(4) covers how to explain to employees the preferred means of reporting emergencies.
-1910.1200, Hazard communication. OSHA Standard.
-
1910.1201, Retention of DOT markings, placards and labels. OSHA Standard.

NCCER Field Safety Learning Series
OPEN

The Safety Learning Series consists of Field Safety and Safety Technology. The training provides the necessary safety task training to all field personnel. This is designed for individuals involved with completing or overseeing a specific task, from the crafts person, crew leader, and safety supervisor and superintendent. 

Field Safety

-Introduction to Safety
-Confined Spaces and Excavations
-Work-Zone Safety
-Electrical Safety
-Working from Elevations
-Steel Erection

-Heavy Equipment, Forklift, Crane Safety
-Introduction to Materials Handling 

Safety Technology

-Introduction to Safety Technology
-Developing a Safety Culture
-Hazard Recognition, Environmental Awareness, and Occupational Health
-Safety Analysis and Assessment
-Safety Data Tracking and Trending
-Site-Specific Safety Plans
-Safety Orientation and Safety Meetings
-Permits and Policies
-Incident Investigations, Policies, and Analysis
-OSHA Inspections and Recordkeeping

Completion of this 40 hour program can assist in training your employees to achieving certification as Construction Site Safety Orientation (CSSO), Construction Site Safety Supervisor (CSSS), Construction Site Safety Technician (CSST), or Construction Site Safety Master (CSSM) as well as help to ensure they understand how to create a safety culture within the work place to boost production and eliminate hazards. Call today!

Competent Person / Trenching and Shoring
OPEN

CFR 1926.32(f)

"Competent Person" means one who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them.

After successful completion of this course you can now be an Appointed Competent Person. You will have the knowledge and understanding to perform:

-Soil Evaluations
-Daily Inspections
-Shoring and sloping evaluations
-Stop Work Authority 

PEC / SafeLandUSA / SafeGulf / H2S Clear
OPEN

PEC Basic Orientation 

PEC Basic Orientation is the most widely used safety orientation in the US onshore and offshore E&P Industry. Accredited by both SafeLandUSA and SafeGulf, this one-day safety orientation can give your employees both credentials. In a comprehensive one-day instructor-led format, PEC Basic Orientation meets API RP 75 & API RP T-1 requirements and provides a basic understanding of general safety information at an awareness orientation level.

Core Compliance

PEC Core Compliance covers over 40 of the most requested health, safety, and environmental (HSE) topics. In a comprehensive 3-day instructor- format, Core Compliance meets full training in 29 HSE topics while meeting awareness level in an additional 15 topics. Accredited by both SafeLandUSA and SafeGulf, this course has an annual refresher to keep student's certifications up to date.

H2S Clear

PEC H2S Clear was designed to improve employee safety for general industry workers who may potentially come in contact with hydrogen sulfide in the workplace. This program meets the revised standards set forth in the ANSI/ASSE Z390.1-2017 and incorporates all of the benefits of a PEC Safety standardized training program. PEC H2S Clear will provide students with crucial knowledge of the dangers of H2S and the precautions, tools, and controls necessary when working in potential H2S environments. 

PEC Gold Shovel

The PEC Gold Shovel Module is an instrucot-led course that brings students through the Gold Shovel Standard Program. The PEC Gold Shovel Module provides awareness of hazards they may encounter in their workplace and strengthens student knowledge of various practices to mitigate those hazards. Students will be shown how to find and apply necessary legal documentation for excavations and state-specific legislation regarding hand-digging and tolerance zones around underground utilities.